|
|
|
EMIC |
ET-6001
Colorful display : Wide(15:9) 7 inch wide-angle view TFT color LCD(800X480 dot).
Full digital with high-speed signal treatment.
Vector /time axis of inspection result and specifications are
displayed on the same picture.
All the settings are controlled by vertical – horizontal key and jog dial.
Improved reproducibility with digital filter(HPE,LPF).
Settings are chosen from preset inspect(EC) specifications X 10
tables, AGC specifications X 10 tables and judge specifications X 10 tables.
AGC(Auto Gain Control) to compensate the detecting sensitivity
by the dedicated probe with distance detecting coil from lift-off
deviation is equipped normally.
Automatic inspection system is built up easily by being assembled
in the existing inspection line.
Several units can be integrated to realize multi-channel inspection.
Inspection of auto parts such as disc, hub, spindle, valve lifter,
rack shaft,stud bolt, valve sheet, bearing, connecting rod and ball joint.
Automatic inspection for wire rod, round bar and pipe.
|
|
|
|
EMIC |
ET-5002
Vector LCD display and various condition setting displays
are equipped for automatic inspection. The condition settings
are input easily by direct key SW.
Automatic inspection line is easily set up by integrating
the unit onto the existing inspection line.
Several units of ET-5002 can be integrated to realize
multi-channel inspection.
Probe coil use :
Automatic inspection for disk, hub, spindle, valve lifter,
rack shaft, stud bolt, valve sheet, bearing, connecting rod, ball joint.
Penetrating coil use :
Automatic inspection for pipes or wires of stainless, copper and aluminum steel.
|
|
|
|
EMIC |
ET-5042(4ch) / ET-5032(3ch) / ET-5022(2ch)
Vector LCD display suitable for automatic inspection.
The condition settings are input easily by direct key SW.
Automatic inspection line is easily set up by integrating the unit onto the existing inspection line.
4 points are inspected automatically at the same time.
Preset conditions are selected externally and used for inspection. 2 and 3 channels are available.
|
|
|
|
EMIC |
Metal composition tester
The unit for non-destructive inspection of metallic materials for
theirdifferent magnetic and/or electrical properties on the base on
electromagnetic induction method.
Variable frequency from 100Hz to 79KHz(100Hz step). Both penetration
coil and probe coil as sensor are used to cover wide application.
Stable inspection by digital set of both X and Y axis.
LED monitor divided into 9 blocks displays the direction of difference
and change of properties.
|
|
|
|
EMIC |
探測線圈
For metal composition test. Custom designed coils also available.
|
|
|
|
EMIC |
Custom Designed
Please feel free to contact and discuss with us
|
|
|
|
|